- Stock: In Stock
- Model: 74007
AG TermoPasty Kontakt S 300 ml – Contact Cleaner for Electrical and Electronic Contacts
AG TermoPasty Kontakt S 300 ml is a specialised cleaning preparation designed to restore the proper operation of electrical and electronic contacts.
It quickly removes oxides, sulfides and other contamination that can increase contact resistance and interfere with reliable electrical connections.
Kontakt S helps restore low contact resistance and smooth current flow, while also helping protect treated contacts against moisture and corrosion.
It is particularly useful for servicing electronic equipment, switches, sockets, connectors, fuse contacts and battery contacts in trail cameras.
Key Benefits
- Effectively removes oxides and sulfides from electrical contacts.
- Helps remove contamination that can interfere with reliable electrical connections.
- Helps restore low contact resistance.
- Supports smooth and reliable current flow through cleaned contacts.
- Helps reduce problems caused by contaminated or oxidised contacts.
- Provides additional protection against moisture and corrosion.
- Suitable for most metals and electronic components.
- Practical 300 ml aerosol for servicing and maintenance.
Ideal for Oxidised Battery Contacts in Trail Cameras
Trail cameras are often used outdoors for long periods, where their battery compartments are exposed to temperature changes, moisture and demanding operating conditions.
If an alkaline battery leaks inside the trail camera, the battery terminals and metallic contacts can become contaminated and may develop oxidation or corrosion deposits.
After the leaked battery has been removed and any remaining battery leakage residue has been safely cleaned according to the appropriate battery-handling instructions, Kontakt S can be used to clean remaining oxides and corrosion from the metallic battery contacts.
Cleaning the affected contacts can help restore a clean metallic contact surface and improve the electrical connection between the batteries and the trail camera.
Kontakt S is intended for cleaning electrical contacts. It should not be considered a substitute for proper removal of leaked alkaline battery residue or for replacing severely damaged or mechanically corroded battery contacts.
Cleaning Battery Contacts After Alkaline Battery Leakage
Battery leakage can leave deposits around springs, plates and other conductive parts inside the battery compartment.
After safely removing the leaked batteries and contamination, Kontakt S can be applied to the affected metal battery contacts to remove remaining oxide deposits.
- Remove all batteries from the camera.
- Make sure the device is completely switched off.
- Remove visible battery leakage residue safely.
- Apply Kontakt S to the oxidised metallic contact.
- Allow the product to act on the contaminated area.
- Remove dissolved contamination as recommended by the manufacturer.
- Allow all treated parts to dry completely before reinstalling batteries.
Important: do not install batteries or switch the device on until the treated contacts and surrounding area are completely dry.
Restores Electrical Contact Performance
Oxides, sulfides and dirt on metallic contacts can increase electrical resistance and cause unstable or intermittent connections.
Kontakt S dissolves and removes this contamination, helping restore a cleaner conductive surface and lower contact resistance.
This makes it useful for both preventive maintenance and servicing electrical equipment affected by dirty or oxidised connections.
Applications
Kontakt S can be used for cleaning and maintaining electrical contacts in:
- trail camera battery compartments,
- battery contacts and springs,
- electrical connectors,
- plugs and sockets,
- switches,
- fuse holders and fuse contacts,
- lamp holders,
- integrated circuit sockets,
- capacitor contacts,
- audio equipment,
- electronic and electrotechnical equipment.
Protection Against Moisture and Corrosion
In addition to its cleaning action, Kontakt S helps protect electrical contacts against moisture and corrosion.
This is particularly useful in devices used in demanding environments, including trail cameras and other outdoor electronic equipment.
Regular inspection and maintenance of battery and connector contacts can help reduce problems caused by contamination and oxidation.
Compatibility with Electronic Components
According to the manufacturer, Kontakt S is suitable for use with most metals and electronic components.
For sensitive materials or unusual surfaces, compatibility should always be checked before extensive application.
The suitability of the product for a specific application should always be verified by the user.
Removing Dissolved Contamination
After Kontakt S has dissolved oxides, sulfides and other contamination, the manufacturer recommends flushing the treated contacts with AG TermoPasty Kontakt U.
This helps remove dissolved residues from the contact area before the component is returned to service.
Allow the cleaned component to dry completely before restoring power or reinstalling batteries.
Application Method
Before using Kontakt S, make sure the device is switched off and disconnected from its power source.
- Remove batteries or disconnect the power supply.
- Shake the aerosol container before use.
- Apply the cleaner to the required contact area.
- Allow the cleaner to act on oxides and contamination.
- For dissolved residues, rinse the contact with Kontakt U as recommended by the manufacturer.
- Allow the component to dry completely.
- Only then reconnect the power supply or reinstall batteries.
Storage
Store Kontakt S in its sealed original container in a dry and well-ventilated area.
- Keep away from heat sources.
- Keep away from ignition sources.
- Protect from direct sunlight.
- Do not expose the aerosol to temperatures above 50 °C.
- Protect from electrostatic discharge.
Important Before Use
- For professional users.
- Read the safety data sheet carefully before use.
- Switch the device off before application.
- Remove batteries before cleaning battery contacts.
- Use the product only in accordance with the manufacturer's instructions.
- Check material compatibility before use on sensitive surfaces.
- Allow treated components to dry completely before applying power.
300 ml Aerosol
The 300 ml aerosol is a practical size for electronics servicing, workshop maintenance and regular cleaning of electrical contacts.
AG TermoPasty Kontakt S 300 ml – Effective Cleaning of Oxidised Electrical Contacts
Kontakt S 300 ml is a specialised contact cleaner for removing oxides, sulfides and other contamination from electrical and electronic contacts.
It is particularly useful for servicing oxidised battery contacts in trail cameras, including contacts affected after leakage of alkaline batteries.
It helps restore low contact resistance, reliable current flow and provides additional protection against moisture and corrosion.
Package contents: 1 × AG TermoPasty Kontakt S aerosol, 300 ml.
