- Stock: In Stock
- Model: V15
Available Options
Universal Remote Duplicator V15 – Copies 300+ remotes (280–868 MHz)
V15 Universal Remote Duplicator is a multi-frequency, 4-channel remote copying device. It replaces multiple garage/gate or smart-device remotes with one compact transmitter. The V15 covers an ultra-wide 280–868 MHz range, letting you clone over 300 different fixed or rolling-code remotes into its memory. To use, simply place the V15 next to any original remote and press both buttons together: an LED blink confirms a successful code capture.
The V15 runs on a single CR2032 battery (included) and can operate for years between changes. It is ideal for homes, offices, or warehouses where you want fewer devices to manage. After cloning, simply press the programmed button on the V15 just like a normal remote – it will transmit the same code as the original. Note that some high-security remotes (see note/FAQ below) cannot be duplicated. For all other remotes, this is a fast, clean solution to unify control of doors, gates, or shutters.
Key Benefits & Features
Ultra-wide frequency
Covers the entire 280–868 MHz band, so it can learn virtually any standard remote in that spectrum. Supports both fixed-code and rolling-code systems, replacing many original remotes with one device. This wide range ensures compatibility with hundreds of models (garage door openers, gates, etc) across major brands.
4 channels in one
Features four separate buttons (channels), each can store a different code. In practice, one V15 can replace up to four distinct remotes – ideal for multiple gates, doors, or devices. Simply clone each original remote to a different button. This cuts down clutter so you carry just one unit.
Fixed and Rolling Code
Automatically copies fixed-code remotes and even most rolling-code remotes. After cloning a fixed-code transmitter, the V15 works immediately. For rolling-code systems (high-security remotes), you may need to teach the new code to the receiver after cloning as per your gate/garage manual.
Easy copying process
Cloning is simple: put the original remote and V15 face-to-face, then press and hold the buttons together. When the V15’s LED flashes, the code has been copied. There’s no need for complex programming or extra tools. Use the included instructions card for step-by-step guidance.
Battery & LED feedback
Powered by a standard CR2032 3V coin cell (included), the V15 lasts for years of normal use. A built-in LED indicates status: it blinks during copying and lights or changes frequency to signal success. The LED also warns of issues like low battery, making setup straightforward.
Long range control
Once programmed, each V15 channel behaves like a regular remote. It has an operating range of up to 30–150 meters in open space, similar to the original transmitters. This ensures reliable control of garage doors or gates from a comfortable distance.
How it works
The V15 uses a face-to-face cloning method. First, clear any old codes in the V15 (see instructions). Then place the V15 next to the original remote (only a few centimeters apart). Press and hold the same button on both units. When the duplicator’s LED flashes, the code has been captured. Repeat for each channel (button) you want to program.
Copying fixed vs. rolling codes
- Fixed-code remotes: After cloning, the new V15 remote works immediately with the receiver.
- Rolling-code remotes: Clone the code first. Then teach the new remote to the gate or garage opener as you would with a spare. (This is typically done by activating a “learn” function on the opener following the manufacturer’s instructions.)
Professional tips for success
- Clear memory first: Make sure to erase any previous codes in the V15 before cloning a new remote.
- Close positioning: Place both remotes as close as possible (face-to-face) during copying. Keep them steady to ensure the signal is received.
- Strong signal: Use a fresh battery in the original remote. If cloning fails, try again – sometimes a slight repositioning or new battery helps.
- One remote at a time: Program each channel separately, and label which original you cloned to each button for clarity.
- Rolling codes: After copying, always complete the pairing process on your opener (e.g. press the “learn” button on the garage receiver) so it recognizes the new remote.
Technical specifications
- Type: Multi-frequency 4-channel remote control duplicator
- Frequency range: 280–868 MHz (supports fixed and rolling codes)
- Channels: 4 independent buttons (up to 4 remotes)
- Battery: 1× CR2032 3V (included)
- Range: ~30–150 m (open area)
- Dimensions: 63 × 37 × 12 mm
- Warranty: 1 year (manufacturer’s warranty)
- Compliance: CE approved
Safety
The V15 is a consumer electronics device; use it like a normal remote. Keep it away from moisture and heat. It uses a small coin battery – keep batteries out of reach of children and dispose of them properly. Do not ingest.
Frequently asked questions (FAQ)
What kinds of remotes can V15 copy?
It can clone most fixed-code and many rolling-code remotes for gates, garage doors, shutters, etc., as long as they operate between ~280–868 MHz. Popular brands like Somfy, NICE, Beninca, Key, Mhouse, and others are supported. Always test the cloned remote after programming.
How many remotes can I program on one V15?
Up to four distinct remotes. The V15 has 4 separate buttons – each acts as an independent channel. You can assign each button to a different original remote, effectively merging up to 4 devices into one unit.
How do I replace the battery?
Open the back cover and replace the used CR2032 cell with a fresh one of the same type. No soldering is required. The LED may start to dim or stop flashing when the battery is low.
Is V15 compatible with rolling-code remotes?
Yes, it can copy many rolling-code remotes. After copying, however, the new V15 button usually must be added to your opener’s memory (using the “learn” or “program” mode on the receiver) just like a new original remote. This extra step is required for security.
What is the copying distance?
During cloning, the remotes should be very close (a few centimeters apart). Once programmed, the V15 operates like the original: up to 30–150 meters in open space depending on the environment.
Which remotes cannot be copied?
The V15 cannot duplicate remotes that use certain proprietary rolling-code schemes. In particular, many Hormann (BiSecur) remotes at 868.3 MHz and similar systems are unsupported. See the note below for a list of known incompatible models. Always check compatibility before purchase.
NOTE: The following remote controls are incompatible with the V15 and cannot be cloned: HORMANN BS series (868.3 MHz BiSecur), ROPER 868MHz, SCS (BiSecur) 433MHz, AT-4, MOTORLINE, PTX-5, Sommer TX55-868-4, ECA remotes, and any unbranded rolling-code systems. Do not purchase expecting to copy these models.
Simplify Your Remote Control Setup
V15 Universal Remote Duplicator gives you an easy, compact way to consolidate multiple remotes into one. No more juggling multiple transmitters – program up to four devices on one handheld unit. Protect your gates and doors with less hassle and no extra clutter. Order now and enjoy streamlined access control.