- Stock: In Stock
- Model: TM2AMM6HT
Schneider Electric TM2AMM6HT is supplied as a new mixed analogue I/O expansion module for professional replacement in compatible Modicon M238 and Twido systems.
Schneider Electric TM2AMM6HT Analogue I/O Expansion Module – 4 High-Level Inputs and 2 Outputs
A brand-new mixed analogue I/O module for professional restoration and expansion of installed Modicon M238 and Twido systems – the right choice when the exact TM2AMM6HT reference is required.
The module combines 4 high-level analogue inputs for 0–10V or 4–20mA signals with 2 analogue outputs for 0–10V or 4–20mA. In one compact unit, it supports process-signal acquisition and analogue output control.
With 12-bit input and output resolution, 24VDC supply, a removable screw terminal block and DIN-rail mounting, it is suitable for dependable professional integration into compatible PLC applications.
Before ordering: verify the TM2AMM6HT reference, PLC compatibility, required input and output signals, supply voltage and wiring diagram.
Combine analogue measurement and analogue control in one module
The TM2AMM6HT expands a compatible PLC system with four analogue inputs and two analogue outputs without requiring two separate expansion modules.
- Four analogue input channels acquire compatible voltage and current process signals.
- Two analogue outputs provide a 0–10V or 4–20mA control signal to compatible equipment.
- 12-bit I/O resolution supports finer conversion of measured values and output setpoint signals.
- Compact six-channel design saves control-cabinet space and simplifies system expansion.
- Removable screw terminal block supports organised wiring and practical servicing.
For applications where the PLC measures and sends an analogue signal
The module receives analogue data from compatible sensors or transducers. The PLC can process that data for process control and generate an analogue output signal for a compatible external device.
This is a practical choice when servicing or restoring installed automation where the M238 or Twido system must retain its analogue input and output channels.
- Process-value acquisition: for compatible sensors and transducers with 0–10V or 4–20mA outputs.
- Analogue control: for sending a reference signal to compatible external equipment.
- Professional system restoration: for exact replacement of an installed TM2AMM6HT module.
Important: configure input and output parameters to match the actual signal, output load and PLC program.
Compatibility where the exact module reference matters
The TM2AMM6HT is a dedicated analogue I/O expansion module for compatible Schneider Electric Modicon M238 and Twido controllers. For industrial expansions, the platform, I/O configuration, electrical signals and connection method must match the installed system.
- Primary use: analogue I/O expansion in Modicon M238 and Twido systems.
- Input design: four high-level non-differential inputs for 0–10V or 4–20mA.
- Output design: two analogue outputs for 0–10V or 4–20mA.
- Electrical connection: one removable screw terminal block.
Essential check: this is not a universal I/O card for every PLC – confirm TM2 support in the controller, project and installed configuration before ordering.
12-bit analogue handling for precise process signals
The module uses 12-bit resolution for analogue inputs and outputs. Its stated sampling time is 16ms per channel, while conversion takes 20ms plus one controller cycle, supporting orderly acquisition and transmission of compatible process signals.
Use appropriate signal wiring for quality analogue measurement and reliable analogue output. The official documentation specifies shielded cable where required by the individual application.
Compact DIN-rail installation and correct signal wiring
The module measures 23.5 × 90 × 70 mm, weighs approximately 0.085kg and is designed for 35mm DIN-rail mounting. Its removable terminal block helps with conductor preparation and servicing.
- Check the supply: the module requires an external 24VDC supply within the 19.2–30V range.
- Check the signal type: confirm the requirements of every analogue input and output separately.
- Observe output load requirements: connected equipment must meet the electrical conditions of the selected voltage or current output.
Before commissioning, verify the official wiring diagram, PLC program configuration, grounding and required protection of signal conductors.
For professional and safe operation
- Disconnect power before connection and protect the control cabinet from unintended energisation.
- Use appropriate signal wiring for voltage, current and analogue output channels.
- Verify PLC configuration and test all signals before commissioning the machine or process.
An incorrect signal type, wiring method or analogue-output load can cause incorrect operation. Verify every input, output and connected device before commissioning.
Package Contents
1 × Schneider Electric TM2AMM6HT analogue I/O expansion module
Supplied brand new in box for professional use in compatible industrial automation systems.
Choose the exact TM2AMM6HT for mixed analogue I/O expansion
If your Modicon M238 or Twido system uses the TM2AMM6HT reference, this brand-new-in-box module is a practical solution for professional maintenance, servicing or restoration of analogue I/O channels.
The combination of four high-level analogue inputs, two analogue outputs, 0–10V and 4–20mA support, 12-bit resolution and DIN-rail mounting provides the key characteristics for compatible automation applications.
Before ordering, compare the TM2AMM6HT reference, PLC platform, required signals, supply voltage, wiring diagram and existing wiring.
