- Stock: In Stock
- Model: 83037
NiCd 3.6 V 2500 mAh Battery Pack for BAES Emergency Lighting
This dedicated NiCd 3.6 V 2500 mAh battery pack is designed for use in emergency and safety lighting fixtures. It is suitable as a replacement battery pack for compatible BAES emergency lighting fixtures and other fixtures requiring the same voltage, dimensions, polarity and connector type.
The battery pack consists of 3 NiCd cells with a nominal voltage of 3.6 V and a capacity of 2500 mAh. Due to its robustness and reliable performance, NiCd technology is suitable for emergency lighting systems.
Important: Before ordering, check the voltage, capacity, dimensions, polarity and connector type of your existing battery pack.
Main Features
- NiCd battery pack for emergency lighting
- Nominal voltage: 3.6 V
- Capacity: 2500 mAh
- Energy: 9 Wh
- Battery configuration: 3 NiCd cells
- Dimensions: 148 × 27 × 27 mm
- Suitable for compatible BAES emergency lighting fixtures
- Suitable for other emergency lights that meet the required technical specifications
- Designed to replace an existing battery pack
Compatibility
The battery pack is suitable for compatible BAES emergency lighting fixtures, including systems that use a battery pack identified as BAES 329055240.
It may also be used in other emergency lighting fixtures requiring a 3.6 V battery pack with dimensions of 148 × 27 × 27 mm and the same polarity and connector type.
The BAES OVA TD210331 is also listed as a known compatible model.
Replacement and Installation
- Disconnect the emergency light from the power supply before replacing the battery.
- Check the voltage, dimensions, polarity and connector before installation.
- Connect the new battery pack using the correct polarity.
- After installation, allow the battery to charge fully and test the emergency lighting function.
- Installation should be carried out by a suitably qualified person.
Reliable Replacement for Emergency Lighting
Replace a worn or defective battery pack and restore the reliable operation of your compatible BAES emergency lighting fixture.
Package contents: 1 × NiCd 3.6 V 2500 mAh battery pack.
Important notice: This dedicated industrial NiCd battery pack is intended for use in emergency lighting fixtures. It is not intended for general or universal use in other devices.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | SAFETY INSTRUCTIONS Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Read all safety warnings and instructions and keep them for future reference. 1. The battery is supplied partially charged. Fully charge it with a suitable charger before first use. 2. Charge the battery only with chargers suitable for this battery type. Using an unsuitable charger may create a fire hazard. 3. Keep the battery out of reach of children. 4. Do not open the battery. Risk of short circuit. 5. If the battery is damaged or used improperly, vapours may be released. The battery may catch fire or explode. Move to fresh air and seek medical attention if symptoms occur. 6. If used incorrectly or damaged, flammable liquid may leak from the battery. Avoid contact. Rinse skin with water. If liquid enters the eyes, rinse thoroughly and seek medical attention. 7. A damaged battery may leak and affect nearby objects. Clean or replace affected parts if necessary. 8. Do not short-circuit the battery. Keep it away from paper clips, coins, keys, screws and other metal objects that could bridge the terminals. A short circuit may cause burns or fire. 9. Do not puncture the battery or expose it to strong impacts or mechanical stress. This may cause overheating, fire or explosion. 10. Do not repair damaged batteries yourself. Servicing should only be carried out by the manufacturer or an authorised service centre. 11. Protect the battery from heat, direct sunlight, fire, dirt, water and moisture. 12. Use the battery only for its intended purpose. If it becomes unusually hot, discoloured, deformed or starts leaking, stop using it immediately. 13. Operate and store the battery at temperatures between -10 °C and +45 °C. 14. Charge the battery only at temperatures between 0 °C and +40 °C. 15. Do not charge the battery continuously for more than 12 hours. Charge indoors only. 16. For long-term storage, store the battery at approximately 60% charge and recharge it every 90 days. 17. In case of fire, do not use water. Use sand or a dry powder fire extinguisher and only if you can do so without putting yourself at risk. |
| EA_MANUFACTURER_MODEL | 888202235 |
| EA_MANUFACTURER | B&W Handelsgesellschaft mbH Thormeyerstr. 1 01877 Bischofswerda Germany Email: product-compliance@b-und-w.com |
| EA_EU_OPERATOR | B&W Handelsgesellschaft mbH Thormeyerstr. 1 01877 Bischofswerda Germany Email: product-compliance@b-und-w.com |
