.png_compress-550x550.png)
.png_compress-550x550w.png)
.png_compress-550x550.png)
.jpg_compress-550x550w.jpg)
.jpg_compress-550x550w.jpg)
.png_compress-80x80.png)
.png_compress-80x80w.png)
.png_compress-80x80.png)
.jpg_compress-80x80w.jpg)
.jpg_compress-80x80w.jpg)
- Stock: In Stock
- Model: E0807
WiFi Garage and Gate Opener Controller with Door Sensor – Tuya / Smart Life
A compact smart controller for remote operation of garage, sliding, swing and sectional doors from a phone, with a magnetic sensor for open and closed status feedback.
The module connects directly to a 2.4 GHz WiFi network and works with Tuya Smart and Smart Life. It enables door operation through the app, timers, schedules, scenes and automations without an additional smart-home gateway.
Control is provided through a potential-free NO contact that sends a short pulse equivalent to pressing a standard wall button. The included wired magnetic sensor provides open/closed status, while Amazon Alexa and Google Assistant support convenient voice control.
Before ordering: verify that the door operator has an input for a potential-free push-button pulse and that stable 2.4 GHz WiFi is available at the installation point.
Operate the door by app, schedule or voice command
- Direct 2.4 GHz WiFi connectivity connects to the home router without an additional smart-home gateway.
- Tuya Smart and Smart Life support enables opening and closing from a phone, plus timers, schedules and scenes.
- Included magnetic sensor provides open and closed status feedback directly in the app.
- Potential-free NO contact works as a smart push button for compatible door-operator inputs.
- Alexa and Google Assistant support adds convenient voice control in a supported smart-home setup.
One short pulse to operate a compatible door controller
The module connects to the door operator input intended for an external push button. When a command is sent from the app or an automation, it briefly closes the potential-free contact and provides the same command as a connected wall button.
The 100–240 V AC supply powers only the controller module. The door operator retains its own power supply, while the potential-free output provides only the control pulse to a compatible operator input.
- opening and closing through the mobile app,
- operation at selected times using schedules and timers,
- integration with selected smart-home scenes and automations.
Suitable for compatible garage, sliding, swing and sectional doors
The controller is suitable for garage, sliding, swing and sectional door operators when their control board supports an external potential-free short-pulse input, such as the input used by a standard push button.
- Garage doors: app-based opening and closing.
- Sliding and swing gates: compatible operators with a push-button input.
- Sectional doors: systems with a suitable operator control input.
Key compatibility check: the output does not supply voltage to the door operator; it is intended solely for a potential-free control-pulse input.
Door status in the app through the magnetic sensor
The included wired magnetic sensor detects the open or closed position and allows the app to show the actual basic door status. You can receive status-change notifications and use the door state in selected automations.
For dependable detection, the two magnetic-sensor parts must be installed correctly; the recommended maximum gap between them is approximately 15 mm.
Flexible installation near the operator, in a box or on DIN rail
The compact 46 × 46 × 18 mm housing can be installed near the door operator, in a suitable installation box or on a DIN rail using the included removable mounting clip.
- install the module in a suitable protected location,
- connect the 100–240 V AC supply and the control contact to the operator input,
- install the magnetic sensor and verify open and closed status in the app.
WiFi requirement: the module works only with a 2.4 GHz WiFi network; 5 GHz WiFi is not supported.
Neat and safe electrical installation
Because the module uses 100–240 V AC mains supply, electrical installation should be completed by qualified personnel with the power disconnected. Install it in a protected location suitable for electrical equipment.
- Before installation, disconnect the power supply to the operator and connection circuit.
- Check the operator wiring diagram and identify the correct external push-button input.
- After installation, test the control pulse, status feedback and operation of the existing local push button.
Remote app access requires an active 2.4 GHz WiFi connection, internet access and a user account in the selected app.
Package Contents
WiFi door-control module, wired magnetic sensor for open/closed status detection and removable DIN-rail mounting clip.
Wiring for the door operator, installation box, mains wiring and the door operator itself are selected according to the individual installation.
Add smart control to a compatible garage door or gate
This WiFi controller is a practical choice when you want to combine door opening, closing and basic status monitoring in one app.
A potential-free contact, magnetic sensor, direct 2.4 GHz WiFi connection and Tuya Smart / Smart Life support enable flexible integration into a smart-home setup.
Before ordering, verify the operator’s potential-free pulse input, 100–240 V AC supply, 2.4 GHz WiFi signal and space for protected module installation.












.png_compress-500x500.png)