- Stock: In Stock
- Model: 83321
- Weight: 0.14kg
7.2V 1500mAh NiMH Battery Pack for Alarm Panels
High-quality rechargeable NiMH battery pack for restoring dependable backup power in compatible Bentel, Honeywell, ADT, Ademco and other alarm panels, keypads and portable computer devices.
The battery pack provides a nominal voltage of 7.2V, a capacity of 1500mAh and nominal energy of 10.8Wh. It uses 6 NiMH cells, making it a practical replacement for a worn battery in a compatible system.
With dimensions of approximately 8.6 × 5.1 × 1.5 cm and a weight of approximately 155g, the battery is designed as a precision-fit replacement part for supported devices where reliable backup power matters.
Before ordering: compare the voltage, technology, dimensions, connector and marking of your existing battery pack with your device.
Restore dependable backup power in your alarm system
A worn battery can reduce the usable runtime of an alarm panel, keypad or portable device. The correct replacement NiMH battery pack helps a compatible device regain the energy reserve it needs for dependable operation.
- 7.2V nominal voltage: suitable for compatible devices designed for a comparable 6-cell NiMH battery pack.
- 1500mAh capacity: provides a useful energy reserve for compatible alarm and monitoring systems.
- 10.8Wh of energy: combines a compact format with practical energy storage for everyday use.
- Rechargeable NiMH technology: supports repeated use with the compatible device charging system.
- Compact dimensions: help the battery pack fit into the designated compartment of a compatible device.
A practical replacement for a battery that has lost capacity
As an existing battery pack gradually loses energy storage capacity, a compatible alarm panel or portable device may benefit from a replacement battery. A new battery pack is a practical way to preserve the usefulness of otherwise fully working equipment.
The combination of 7.2V, 1500mAh, 10.8Wh and NiMH technology is designed for devices using this electrical system. Matching all relevant characteristics supports correct installation and reliable use.
- When the runtime of a compatible device has become noticeably shorter.
- During planned maintenance of an alarm or monitoring system.
- To restore the usefulness of a compatible device without replacing the entire system.
Compatibility with selected alarm panels and keypads
The battery pack is designed for compatible ADI, ADT, Ademco, Bentel and Honeywell devices using an equivalent 7.2V NiMH battery pack.
- Bentel: BW64 and devices using the BW-B72K reference.
- Honeywell: Lynx 3000, Lynx 5000, Lynx 5100, Lynx Touch L5200, L3000, L5000, L5100 and L7000.
- ADT: LYNX Alarm Security Panel, Pulse TS Keypad, QuickConnect Security System and Safewatch QuickConnect Plus.
- Ademco: Lynx, K5109, LYNXRCHKIT-SC, WALYNX-RCHB-SC and other compatible models.
Important: the listed models are a guide. Always verify the details on your existing battery and the connector in your device before ordering.
A suitable replacement for established original references
The battery pack is suitable as a replacement for several original references used in compatible alarm devices and control panels.
- Bentel BW-B72K
- 103-301179 and 103-303689
- 300-03864-1
- GP 130AAM6BMX
NiMH technology for reliable everyday use
NiMH cells offer useful energy density and suit devices that require a stable, repeatable energy source. Six cells together provide the 7.2V nominal voltage required by compatible systems.
The plastic and metal construction combines a compact profile with practical cell protection for installation in the intended battery compartment of the device.
Simple battery pack replacement
Replacement is straightforward when the battery compartment is accessible and the new pack matches the original electrically and mechanically.
- Open the battery compartment: access the existing battery pack according to the device manufacturer’s procedure.
- Compare the connector: check its shape, contact layout and correct connection.
- Install the new pack: place the battery securely in the intended compartment and close the device housing.
For the best result: use a battery pack with the same technology and nominal voltage as the original battery.
Responsible battery use and disposal
- Use the compatible charging system specified for your device.
- Store the battery pack in a dry place and protect it from physical damage.
- Return exhausted rechargeable batteries to a designated battery collection point.
Package contents
1× 7.2V / 1500mAh / 10.8Wh NiMH battery pack.
Extend the useful life of your compatible alarm panel with the right battery pack
If your device uses a 7.2V NiMH battery pack and the existing battery no longer provides the required runtime, replacing the battery pack is a sensible way to restore backup power.
The combination of 7.2V, 1500mAh, 10.8Wh and 6 NiMH cells provides a dependable energy solution for compatible alarm, monitoring and communication systems.
Before ordering, compare the voltage, technology, dimensions, connector and marking of your existing battery pack.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | SAFETY INSTRUCTIONS Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Read all safety warnings and instructions and keep them for future reference. 1. The battery is supplied partially charged. Fully charge it with a suitable charger before first use. 2. Charge the battery only with chargers suitable for this battery type. Using an unsuitable charger may create a fire hazard. 3. Keep the battery out of reach of children. 4. Do not open the battery. Risk of short circuit. 5. If the battery is damaged or used improperly, vapours may be released. The battery may catch fire or explode. Move to fresh air and seek medical attention if symptoms occur. 6. If used incorrectly or damaged, flammable liquid may leak from the battery. Avoid contact. Rinse skin with water. If liquid enters the eyes, rinse thoroughly and seek medical attention. 7. A damaged battery may leak and affect nearby objects. Clean or replace affected parts if necessary. 8. Do not short-circuit the battery. Keep it away from paper clips, coins, keys, screws and other metal objects that could bridge the terminals. A short circuit may cause burns or fire. 9. Do not puncture the battery or expose it to strong impacts or mechanical stress. This may cause overheating, fire or explosion. 10. Do not repair damaged batteries yourself. Servicing should only be carried out by the manufacturer or an authorised service centre. 11. Protect the battery from heat, direct sunlight, fire, dirt, water and moisture. 12. Use the battery only for its intended purpose. If it becomes unusually hot, discoloured, deformed or starts leaking, stop using it immediately. 13. Operate and store the battery at temperatures between -10 °C and +45 °C. 14. Charge the battery only at temperatures between 0 °C and +40 °C. 15. Do not charge the battery continuously for more than 12 hours. Charge indoors only. 16. For long-term storage, store the battery at approximately 60% charge and recharge it every 90 days. 17. In case of fire, do not use water. Use sand or a dry powder fire extinguisher and only if you can do so without putting yourself at risk. |
| EA_MANUFACTURER_MODEL | 800108510 |
| EA_MANUFACTURER | B&W Handelsgesellschaft mbH Thormeyerstr. 1 01877 Bischofswerda Germany Email: product-compliance@b-und-w.com |
| EA_EU_OPERATOR | B&W Handelsgesellschaft mbH Thormeyerstr. 1 01877 Bischofswerda Germany Email: product-compliance@b-und-w.com |
.png_compress-250x250.png "Universal 2.4V 2000mAh NiMH Battery Pack – 2× AA / Mignon")
