- Stock: In Stock
- Model: 64132
24V / 29.4V 2A Charger for Lithium Batteries with 3-Pin XLR Connector
A reliable 29.4V DC / 2A charger for compatible lithium battery packs – a practical solution for electric scooters, e-bikes and electric wheelchairs with a 3-pin Canon/XLR connector.
The charger is intended for batteries whose manufacturer specifies a 29.4V charging voltage. It uses CC/CV charging, delivering the required current and then stabilising the voltage as charging is completed.
With a 2A output current, it is suitable for regular, controlled charging of compatible 24V-class lithium batteries. The LED indicator provides a quick status overview, so you can see whether charging is in progress or the battery is charged.
Before ordering: confirm that the battery requires a 29.4V charger and has matching 3-pin XLR connector wiring and polarity.
A practical replacement charger for a compatible 24V lithium battery
- 29.4V / 2A output is suitable for batteries where the manufacturer specifies 29.4V charging and up to 2A current.
- 3-pin Canon/XLR connector provides the required connection for devices using this charging-port format.
- CC/CV charging logic supports the prescribed charging process for compatible lithium battery packs.
- Red and green LED indication makes charging status easy to check without extra battery testing.
- Wide 100–240V AC input allows use with a suitable mains connection in different electrical networks.
When your existing charger no longer charges reliably
A lost, damaged or worn charger can quickly make an otherwise fully functional electric scooter, e-bike or electric wheelchair unusable. A correctly selected replacement charger is therefore an important part of dependable day-to-day operation.
This charger is a sensible choice when its 29.4V charging voltage, 2A output, battery type and 3-pin XLR connector match your existing charger and battery.
- Suitable for compatible electric-scooter batteries.
- Suitable for compatible e-bike batteries.
- Suitable for compatible lightweight electric wheelchairs.
A 24V marking alone is not enough to confirm compatibility. Charging voltage, connector, polarity and the battery manufacturer’s requirements must also match.
3-pin XLR connector for the correct battery connection
This version uses a 3-pin Canon/XLR output connector. This connector type is common on selected electric-scooter, e-bike and mobility-device batteries, but its external shape alone does not prove electrical compatibility.
- Check the pin count: the connector must be a 3-pin XLR/Canon type.
- Check the polarity: the pin configuration must match the battery.
- Check the charging voltage: the battery must require 29.4V charging.
Do not confuse this XLR version with a round DC connector. They are mechanically and electrically different connector types and are not interchangeable.
CC/CV charging with a clear battery-status indication
The charger uses CC/CV – constant-current / constant-voltage charging. This provides the prescribed process for a compatible lithium battery: charging starts with controlled current and finishes at the required voltage.
A red LED indicates active charging. A green LED indicates a full battery or a condition where charging is not active. The charger is also listed with an automatic stop function after charging is complete.
Simple use once compatibility is confirmed
Before use, place the charger on a stable, dry and ventilated surface. Connect the XLR plug to the battery without force, then connect the charger to the electrical mains using a suitable power cable.
- First check the battery-pack label and its charging requirements.
- Connect the 3-pin XLR plug to the corresponding battery connection.
- Monitor the LED charging-status indicator during charging.
If the connector does not fit smoothly or the battery specifications are unclear, do not connect the charger until compatibility has been confirmed.
Safe charger use
- Use the charger only with a compatible battery requiring a 29.4V charging voltage.
- Charge in a dry location, away from water, moisture and direct heat sources.
- Do not cover the charger housing during use, as it may become warm while operating.
- Do not use the charger if the cable, housing or connector is visibly damaged.
Do not use with batteries requiring a different charging voltage or connector type. An incorrect charger can damage the battery, BMS or connected device.
Package Contents
1 × 29.4V / 2A charger with 3-pin Canon/XLR output connector.
The battery and electric device are not included. Before ordering, check your battery-pack requirements and connector format.
Choose the correct charger for your lithium battery
This 29.4V / 2A charger is a practical replacement when you need a charger for a compatible 24V-class lithium battery with a 3-pin Canon/XLR connector.
The combination of 29.4V, 2A, CC/CV charging and LED status indication provides the key features needed for regular charging of a compatible device.
Before purchase, compare the charging voltage, battery type, polarity and 3-pin XLR connector with your existing charger or battery.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | WARNING Improper use of batteries or chargers may cause overheating, fire, electric shock or injury.- Before use, check that the battery and charger are compatible in voltage, charging voltage, current, connector type and polarity. - Use only chargers suitable for the specific battery type. - If compatibility is uncertain, contact the manufacturer or authorised dealer. - Charge batteries only in a dry, well-ventilated area and away from heat sources, direct sunlight and flammable materials. - Do not cover the battery or charger while charging. - Disconnect the charger from the mains after charging. - Do not use or charge damaged, swollen, leaking, deformed or unusually hot batteries. - Stop charging immediately if the battery becomes excessively hot, emits smoke, leaks or produces an unusual smell. - Do not short-circuit, open, puncture, crush or modify batteries. - Keep batteries and chargers away from water, moisture, fire and excessive heat. - Keep battery terminals away from metal objects that could cause a short circuit. - Keep batteries and chargers out of reach of children. - Do not use damaged chargers, cables, plugs or connectors. - Dispose of used or damaged batteries according to local regulations. Do not dispose of batteries in fire or household waste.Always follow the specific instructions provided by the battery and charger manufacturer. |
| EA_MANUFACTURER_MODEL | XMS-L7S20 |
| EA_MANUFACTURER | eVatmaster Consulting GmbH Bettinastrasse 30 60325 Frankfurt am Main Germany Email: contact@evatmaster.com |
| EA_EU_OPERATOR | eVatmaster Consulting GmbH Bettinastrasse 30 60325 Frankfurt am Main Germany Email: contact@evatmaster.com |
