EA GUIDE · IR HEATING

Warmth and light in one place: how to use Infraboost Shine throughout the day

A room often needs both comfortable warmth and good lighting. Infraboost Shine combines a ceiling-mounted infrared heater and a 40 W LED light in one appliance. Walls remain free for furniture, shelves or mirrors, and there is no extra heater on the floor.

The most useful feature is not simply combining two functions: heating and lighting work independently. Use the light when no heating is needed, enjoy warmth without bright lighting, or adjust both for the room in the evening.

Three ways to use the same ceiling appliance

Light only For work, cleaning or summer days when additional heating is unnecessary.
Heat only For a chilly morning or evening when you want warmth without switching on the LED.
Heat + light For a day at the office, opening a salon or enjoying a living space.

The dimmable LED adjusts from warmer to cooler white within 3000–6000 K. The same space can therefore feel different during focused daytime work and relaxed evenings. This adjusts the lighting, not the heater's output.

Example 1: a home office that becomes a living space in the evening

Imagine a well-insulated home office of about 11 m². During the workday, you want brighter white light and warmth while the room is occupied. Afterwards, turn the heating off, dim the light and choose a warmer tone. The room changes from workspace to a comfortable reading corner.

The Shine 1200 W is a useful starting point: its indicative area for a well-insulated room is up to 12 m². Windows, external walls and ceiling height also matter. Ceiling placement means no heater under the desk and more wall space for shelves or a screen.

Example 2: a salon or reception area with a clean design

In a hair salon, walls are valuable space for mirrors and shelves, while floors are needed for workstations. Ceiling-mounted Shine brings two daily functions together without adding a free-standing appliance. Prepare a comfortable room before opening, choose brighter light while working and move to a softer light setting later in the day.

For a well-insulated room of about 17 m², the Shine 1800 W belongs on the shortlist: its indicative area with good insulation is up to 18 m². Wi‑Fi heating control is convenient when you want to prepare the space before arrival. Match the final heating output to the room's actual heat demand.

Example 3: a dining area with ceramic flooring

The ceiling is often a natural location for lighting above a dining area. Shine adds directed infrared warmth at the same point. Use brighter lighting for lunch, then dim it in the evening and switch on the heating whenever the space calls for it.

Plan the position around where people sit and move, rather than simply choosing the geometric centre of the ceiling. That makes both light and warmth useful in the occupied area. For a higher ceiling or greater heat loss, size the heating output accordingly rather than relying only on floor area.

1200 W or 1800 W? Start with your room

ModelHeating + LEDIndicative area with good insulationTypical setting
Shine 1200 W1200 W + 40 WUp to 12 m²Home office, small studio or workroom
Shine 1800 W1800 W + 40 WUp to 18 m²Larger living space, salon or reception area

With poorer insulation, the indicative areas are lower: up to 8 m² for the 1200 W model and 12 m² for the 1800 W model. For very good insulation, the listed figures are up to 16 m² and 24 m² respectively. These are selection starting points, not a substitute for assessing heat loss.

A short plan before ordering

  1. Measure the room and note ceiling height, external walls and large glazed areas.
  2. Mark the occupied zone: desk, workstation, sofa or reception counter.
  3. Define your lighting needs: mainly focused work, general lighting or evening ambience as well.
  4. Choose the output for insulation and use, not just the largest listed floor area.
  5. Plan ceiling installation and electrical connection according to the selected model's instructions.

Installation note: Shine is a ceiling appliance for dry indoor spaces (IP20). Do not cover the heating surface; follow the supplied mounting instructions and required clearances. Have a qualified person make the electrical connection.

Frequently asked questions

Can I use only the light?
Yes. The LED lighting and heating can operate separately or together.

Does the 1800 W version have a stronger LED?
Both models featured here have 40 W LED lighting. Their main difference is heating output.

Can I adjust the light colour?
Yes. The 3000–6000 K range offers warmer or cooler white light, and the LED can be dimmed.

Which model suits my room?
Send us the room size, ceiling height, a photo and information about its insulation. We can then connect the 1200 W or 1800 W choice to how you actually use the space.

Make your ceiling work twice as hard

If you want pleasant warmth, adjustable lighting and an uncluttered room, choose Shine to suit your floor area and insulation. Send us the basic dimensions and a room photo for a quick recommendation.

Explore Shine 1200 W Explore Shine 1800 W

Conclusion

Infraboost Shine suits rooms where warmth, lighting and free floor space all matter. By day it can provide functional lighting and heat; in the evening, adjustable light helps create a different mood. Start with your room size, insulation and occupied area, then select the 1200 W or 1800 W version.