ALU 300W Infraboost Premium – slim aluminium IR panel for smaller spaces
ALU 300W Infraboost Premium is a compact infrared heating panel designed for comfortable primary or supplementary heating of smaller spaces. Its slim aluminium design and neutral white matt surface allow it to blend discreetly into residential and commercial interiors.
The panel operates without a fan and is quiet in use, making it suitable for smaller work rooms, hallways, WCs, utility rooms, offices, bathrooms and other compact spaces where comfortable heat without additional air movement is desired.
What size room is it suitable for?
The required infrared heating output depends on the quality of insulation, external walls, windows, ceiling height and the desired indoor temperature. For this reason, the recommended heating area is shown according to the insulation quality of the room.
Where can the ALU 300W Infraboost Premium be used?
Thanks to its compact format and 300 W output, the panel is especially suitable for smaller rooms, individual heating zones or as an additional heat source.
How does infrared heating work?
An infrared panel does not transfer heat in the same way as a traditional convection heater. Infrared heat is directed towards people, walls, floors, furniture and other surfaces in the room.
The warmed surfaces then gradually release heat back into the room. Because the panel does not use a fan, it does not create additional air movement during operation and is practically silent.
Slim aluminium panel
The Infraboost ALU series has been designed for discreet installation. The slim aluminium panel and white matt surface make it easy to integrate into a wide range of interiors.
Its low weight makes handling easier during installation, while the aluminium construction provides a solid and clean finish.
IP65 protection
The high IP65 protection rating allows the panel to be used in areas where increased protection against dust and water is required.
This also makes the ALU 300W suitable for bathrooms, provided that correct installation and the prescribed electrical zones are observed.
Wall mounting
The ALU 300W Infraboost Premium is primarily designed for standard wall mounting. Thanks to its slim profile, the panel takes up very little space and does not reduce the usable floor area.
The mounting elements allow clean and discreet installation on the selected wall.
Conditional ceiling mounting
Ceiling installation of this model is conditionally possible. If you intend to install the panel on the ceiling, you must contact us before purchasing. We therefore kindly ask you to get in touch with us before placing your order so that we can check the suitability of the panel and the appropriate installation method for your space.
Designed for long-term use
The ALU 300W Infraboost Premium is designed as a simple and reliable heating panel without fans or complex mechanical components. This construction enables quiet operation and straightforward everyday use.
For additional confidence in long-term use, this model comes with a 8-year warranty.
Compact IR heating for smaller spaces
The ALU 300W Infraboost Premium is a suitable choice for smaller residential and commercial spaces where quiet, discreet and simple infrared heating is required.
Its slim aluminium construction, IP65 protection and the option of wall or conditional ceiling mounting make it adaptable to a variety of spaces and applications.
Detailed technical specifications, dimensions, electrical data, surface temperature and other technical information are provided in the product's technical data section.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | • The heating element must not be installed directly below a wall socket. • The installation of an infrared heating element in special rooms (rooms with shower, ba- thtub or swimming pool) as well as in public places may only be done by a specialized installation company taking into account the appropriate standards and norms of the country concerned. • The infrared heating element may only be connected to alternating current 230 Volt, 50Hz. • The infrared heating element must not be exposed to excessive moisture. • Do not put down objects on the infrared heating element and do not cover the infra- red heating element !! Attention: risk of overheating !! • The infrared heating element is equipped with a safety temperature limiting device, which turns off in case of overheating and automatically turns on again after cooling down. • The plug needs to be switchable without tension at all times during operation by switch or thermostat. • The minimum distance to other objects should be 50 cm away from the front, 20 cm to the sides and 10 cm upward and downward. • For the installation of an infrared heating element on a brick or stone wall, only the holding and fixing material provided for it must be used. On other types of wall or masonry (as e.g. Rigips, wood, …) please use suitable holding and fixing material. • In case of possible disassembly or transport allow the infrared heating element to comple- tely cool down. • The infrared heating element is not meant to be handled by persons (children included) with reduced physical, sensorial or mental faculties or without experience and/or knowledge, unless they are supervised by a person responsible for their safety or receive instructions on how to use the device. • Children never see the danger, which can occur when dealing with electrical devices. So never leave children alone with electrical devices. Keep out of reach of small children. If the device is installed in children’s rooms or rooms accessible to children, make sure that the device is suspended 1.2m above the ground. • Do not try to repair the infrared heating element, the power cable cannot be replaced and must always be returned to the manufacturer for repairs. |
| EA_MANUFACTURER_MODEL | VCIR-30-90-300 |
| EA_MANUFACTURER | Heatness GmbH Rudolf Hausner Gasse 3 1220 Wien AUSTRIA office@heatness.at Tel.: +43 (0) 1 890 36 28 |
| EA_EU_OPERATOR | Heatness GmbH Rudolf Hausner Gasse 3 1220 Wien AUSTRIA office@heatness.at Tel.: +43 (0) 1 890 36 28 |
| IR PANEL | BUYING PARAMETERS | |
| Heating area – poor insulation | up to 2 m² |
| Heating area – good insulation | up to 3 m² |
| Heating area – very good insulation | up to 4 m² |
| Wall mounting | Yes |
| Ceiling mounting | Conditional – please contact us before purchase |
| IR PANEL | TECHNICAL PARAMETERS | |
| Power | 300 W |
| Dimensions | 900 × 300 × 25 mm |
| Supply voltage | 230 V AC |
| Rated current | 1,3 A |
| Weight | 2,95 kg |
| IP rating | IP65 |
| Surface temperature | 90–110 °C |
| Heating element | Carbon heating element |
| Panel material | Aluminium |
| Surface finish | Matt |
| Colour | White |
| Power cable length | 1,8 m |
| Certifications / compliance | CE, RoHS, TUV, Seibersdorf |
| Warranty | 8 years |
-250x250.jpg "Infraboost Shine 1200W – High-Power Infrared Ceiling Panel with 40W LED Lighting")
-250x250.jpg "Infraboost Shine 1200W – High-Power Infrared Ceiling Panel with 40W LED Lighting")
-250x250.jpg "BOOST iR10 1000W High-Temperature Infrared Heater with WiFi & Remote")
-250x250.jpg "BOOST iR10 1000W High-Temperature Infrared Heater with WiFi & Remote")
-250x250.jpg "BOOST iR18 1800W High-Temperature Infrared Heater with WiFi & Remote")
-250x250.jpg "BOOST iR18 1800W High-Temperature Infrared Heater with WiFi & Remote")
-250x250.jpg "BOOST iR24 2400W High-Temperature Infrared Heater with WiFi & Remote")
-250x250.jpg "BOOST iR24 2400W High-Temperature Infrared Heater with WiFi & Remote")