







- Stock: In Stock
- Model: GLASSM800
Infraboost Infrapower XL Mirror Infrared Heater 800W – 120 × 60cm for up to Approx. 15m²
The elegant Infraboost Infrapower XL mirror infrared heater combines a large practical mirror with efficient 800W heating – an ideal solution for a warm, refined and functional bathroom, hallway or bedroom.
With 800W output and dimensions of 120 × 60 × 2.5cm, the XL model is designed for rooms up to approximately 15m² with good insulation and a ceiling height of around 2.5m.
The heated mirror surface helps reduce mirror fogging, while infrared warmth comfortably heats surfaces and people in the room. The panel has IP65 protection, integrated temperature sensors and a 1.8m white connection cable with Schuko plug.
Important when ordering: the panel has no integrated room thermostat. Choose a suitable separate thermostat for precise temperature control and scheduling.
A practical mirror and comfortable heating in one elegant panel
Infraboost Infrapower XL is made for rooms where you want to combine the daily usefulness of a large mirror with comfortable infrared warmth, without adding a conventional radiator to the wall.
- A large 120 × 60cm mirror surface is practical for a bathroom, dressing area, bedroom or hallway.
- 800W infrared output provides noticeable warmth for a room of up to approximately 15m² in a suitably insulated building.
- A heated anti-fog mirror helps keep the mirror clear after a shower or bath.
- IP65 protection supports use in appropriately planned bathroom spaces.
- A frameless mirror finish complements modern as well as classic interiors.
- An 8-year warranty makes it a long-term solution for supplemental or primary heating of a smaller room.
Comfortable warmth exactly where you feel it most
The infrared panel transfers warmth through radiant heat. Rather than heating all of the room air first, its warmth reaches people and surfaces in front of the panel. This makes the mirror heater especially pleasant next to a washbasin, dressing area or a place used after showering.
The panel reaches operating temperature within minutes, while the first use also gradually warms colder surfaces in the room. For the best effect, install it on a wall with an open view towards the useful area of the room.
- For a bathroom where you want a mirror and additional warmth in one product.
- For a hallway or dressing area where a mirror saves space while adding heating.
- For a bedroom or smaller room as comfortable infrared supplemental heating.
The up-to-15m² guidance is based on a well-insulated room with a height of around 2.5m. Actual heating demand depends on insulation, room height, external walls and use.
Mirror surface, warmth and a clear view in the bathroom
The bathroom is a space where both a mirror and warmth matter especially. The heated mirror surface helps reduce fogging, while 800W infrared output creates a more comfortable feeling before and after showering.
Infraboost Infrapower XL also suits a hallway, bedroom or dressing room – anywhere a large mirror is useful and elegant wall heating is preferred over a conventional radiator.
- Bathroom: a mirror and additional warmth for daily comfort.
- Hallway: a practical entrance mirror with room heating.
- Dressing area or bedroom: a functional mirror surface and pleasant supplemental heating.
IP65 protection and integrated overheat protection
The panel has an IP65 rating, providing protection against dust and water jets. Integrated temperature sensors monitor the heating element and help prevent overheating.
The mirror heater is designed for wall mounting and has a 130°–140° radiation angle, distributing warmth effectively into the space in front of the panel.
For bathroom use, have the mounting position and electrical installation checked by a qualified electrician in accordance with applicable local regulations.
Simple wall mounting with the original fixing system
Infraboost Infrapower XL is designed for wall mounting. The supplied template, screws and wall plugs help achieve accurate installation, while the original mounting system maintains the required ventilation gap behind the panel.
- Mount the panel only with the supplied original fixing system.
- Leave clear space in front of the panel for effective radiant heat output.
- Connect the 1.8m power cable to a suitable, accessible electrical socket.
Install the panel on a stable wall and do not position it directly below or in front of an electrical socket.
Add a thermostat for comfortable, controlled heating
The panel does not contain an integrated room thermostat, allowing you to choose the thermostat that best fits your routine – a simple plug-in thermostat, wireless thermostat or another suitable temperature-control solution.
A thermostat allows you to set a desired room temperature and heating intervals. This lets you preheat a bathroom or another room at the times when you actually use it.
A thermostat is not integrated into the panel. Choose one separately for automatic temperature regulation.
Safe use and easy maintenance
- Do not cover the panel, as it must radiate heat freely into the room.
- Unplug the panel before cleaning and allow it to cool down fully.
- Clean the mirror surface gently with a soft, lightly dampened cloth and dry it fully before switching the panel on again.
- Check the cable and plug regularly and do not use the panel if damage is visible.
The front surface becomes hot during operation. Do not cover or touch the panel until it has cooled fully after switching off.
Package contents
1 × Infraboost Infrapower XL mirror infrared heater – 800W, 120 × 60cm
Included are the Schuko connection cable, original wall-fixing system, mounting template, screws and wall plugs.
The thermostat is selected separately according to the preferred heating-control method.
A large mirror and pleasant infrared warmth in one panel
Infraboost Infrapower XL is an excellent choice for a bathroom, hallway, dressing room or bedroom where you want a functional 120 × 60cm mirror together with efficient 800W infrared heating.
With IP65 protection, an anti-fog mirror surface, a 1.8m Schuko power cable and the option of a separate thermostat, it is a considered solution for rooms up to approximately 15m².
Before ordering, check the room size, intended wall-mounting position and choose a suitable thermostat for the desired temperature control.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | • The heating element must not be installed directly below a wall socket. • The installation of an infrared heating element in special rooms (rooms with shower, ba- thtub or swimming pool) as well as in public places may only be done by a specialized installation company taking into account the appropriate standards and norms of the country concerned. • The infrared heating element may only be connected to alternating current 230 Volt, 50Hz. • The infrared heating element must not be exposed to excessive moisture. • Do not put down objects on the infrared heating element and do not cover the infra- red heating element !! Attention: risk of overheating !! • The infrared heating element is equipped with a safety temperature limiting device, which turns off in case of overheating and automatically turns on again after cooling down. • The plug needs to be switchable without tension at all times during operation by switch or thermostat. • The minimum distance to other objects should be 50 cm away from the front, 20 cm to the sides and 10 cm upward and downward. • For the installation of an infrared heating element on a brick or stone wall, only the holding and fixing material provided for it must be used. On other types of wall or masonry (as e.g. Rigips, wood, …) please use suitable holding and fixing material. • In case of possible disassembly or transport allow the infrared heating element to comple- tely cool down. • The infrared heating element is not meant to be handled by persons (children included) with reduced physical, sensorial or mental faculties or without experience and/or knowledge, unless they are supervised by a person responsible for their safety or receive instructions on how to use the device. • Children never see the danger, which can occur when dealing with electrical devices. So never leave children alone with electrical devices. Keep out of reach of small children. If the device is installed in children’s rooms or rooms accessible to children, make sure that the device is suspended 1.2m above the ground. • Do not try to repair the infrared heating element, the power cable cannot be replaced and must always be returned to the manufacturer for repairs. |
| EA_MANUFACTURER_MODEL | VCIR-60-120-800-G-M |
| EA_MANUFACTURER | Heatness GmbH Rudolf Hausner Gasse 3 1220 Wien AUSTRIA office@heatness.at Tel.: +43 (0) 1 890 36 28 |
| EA_EU_OPERATOR | Heatness GmbH Rudolf Hausner Gasse 3 1220 Wien AUSTRIA office@heatness.at Tel.: +43 (0) 1 890 36 28 |
| IR PANEL | BUYING PARAMETERS | |
| Heating area – poor insulation | up to 7 m² |
| Heating area – good insulation | up to 11 m² |
| Heating area – very good insulation | up to 15 m² |
| Wall mounting | Yes |
| IR PANEL | TECHNICAL PARAMETERS | |
| Power | 800 W |
| Dimensions | 1200 × 600 × 25 mm |
| Supply voltage | 230 V AC |
| Rated current | 3,5 A |
| Weight | 16,1 kg |
| IP rating | IP65 |
| Surface temperature | 90–110 °C |
| Heating element | Carbon heating element |
| Panel material | Glass / Aluminium |
| Power cable length | 1,8 m |
| Certifications / compliance | CE, RoHS, TUV, Seibersdorf |
| Warranty | 8 years |








-250x250.jpg)
-250x250.jpg)

-250x250.jpg)
