This offer ends in:
- Stock: In Stock
- Model: PAR38E
PHILIPS PAR38E 150W 230V E27 - Infrared Heat Therapy Lamp for Muscles and Joints
The original PHILIPS PAR38E infrared reflector lamp is designed for local heat therapy of muscles and joints - providing pleasant deep warmth, helping relax muscular tension and supporting everyday recovery after physical strain.
The exact PHILIPS PAR38 IR 150W E27 230V Red model combines 150W power, 230V rated voltage and a standard E27 screw base. Its PAR38 reflector construction helps direct warmth towards the selected area of the body.
Its infrared spectrum has a pronounced peak at approximately 1000nm in the IR-A range, producing warmth that is pleasantly distributed through the skin and deeper tissue. This makes the lamp suitable for local warmth in cases of muscular tension, stiff muscles and joints, lower-back discomfort, sports strain and massage preparation.
Before ordering: check the old lamp marking, 150W rating, 230V voltage, E27 base, PAR38 shape and the instructions for your infrared device.
Local infrared warmth when muscles and joints need it most
- Deep IR-A warmth creates a pleasant local warming sensation for the skin, muscles and joints.
- Support for muscular tension and stiffness makes it useful after everyday strain, sport or long periods of sitting.
- Suitable for muscle, joint and lower-back discomfort as part of local heat therapy with a suitable infrared device.
- A practical preparation for massage helps warm the target area beforehand and relax tense muscles.
- PAR38 reflector construction directs warmth towards the area you want to treat locally.
How infrared warmth supports muscle relaxation
The PHILIPS PAR38E emits infrared warmth that heats the skin and delivers a warming sensation to muscles and joints. Local heat can support increased circulation in the irradiated area, relaxation of muscular tension and a greater feeling of comfort.
The lamp is used in a suitable infrared device for local heat therapy. It is suitable for home use, massage studios, physiotherapy settings and other environments where the device specifically requires a PHILIPS PAR38E / 150W lamp.
- For relaxing tense muscles and stiff joints.
- For local warmth after sport, work or other physical strain.
- For warming muscles before massage or a relaxation treatment.
- For supporting heat therapy for lower-back, muscle and joint discomfort.
Use: follow the exposure time and distance stated in the instructions for the infrared device. Many devices recommend an approximate distance of 20–30cm, but the individual device instructions always take priority.
Compatibility depends on the complete set of specifications
An E27 base alone does not confirm compatibility. Power, voltage, lamp shape, required operating position and the construction of the infrared device must also match.
- 230V infrared devices built for a 150W E27 lamp.
- PAR38 holders and reflector devices where the manufacturer specifies PHILIPS PAR38E or the identical model.
- Philips InfraPhil devices, but only where their instructions explicitly specify replacement with a PHILIPS PAR38E / 150W lamp.
Do not use as a universal household bulb: this lamp must be installed in a purpose-designed infrared device with a suitable E27 holder and adequate heat resistance.
IR-A infrared warmth for more pleasant local therapy
PHILIPS infrared lamps for human applications have a spectrum with a pronounced peak at approximately 1000nm in the IR-A range. This infrared warmth is distributed through a larger skin volume, creating a more pleasant and diffuse warming sensation.
Red hard-glass construction is characteristic of this PHILIPS PAR38E model. The lamp is primarily intended to emit infrared warmth in a therapeutic device, rather than to provide general room lighting.
Replace the lamp safely in a few simple steps
Replace the lamp only after the infrared device has been unplugged from the mains and the old lamp has cooled down completely.
- Disconnect the device from the mains supply.
- Allow the old lamp to cool down - it becomes very hot during operation.
- Screw the new lamp into the appropriate E27 holder without applying excessive force.
- Observe the specified VBU/VBD90 operating position and the device instructions.
Before first use: ensure that the lamp is undamaged, correctly installed and that the device is designed for safe operation with a 150W PAR38 lamp.
Safety when using infrared warmth
- Do not look directly into the illuminated lamp. Always protect the eyes in accordance with the instructions for the device in use.
- Follow the specified distance and duration of use. More intense or longer exposure is not safer or more effective.
- Do not touch the lamp while it is operating. Allow it to cool before replacement, cleaning or storage.
- Do not use a cracked or damaged lamp. If it breaks, use gloves or appropriate protective tools when removing glass fragments.
Warning: use this lamp only in a suitable infrared device and always follow its instructions. Infrared heat applied too closely or for too long may cause burns or other unwanted skin reactions.
Package Contents
1 × PHILIPS PAR38E / PAR38 IR 150W 230V E27 red infrared lamp
The infrared device, lamp holder and protective equipment are not included.
Restore local therapeutic warmth to your infrared device
If your device requires a PHILIPS PAR38E 150W lamp and the existing bulb has reached the end of its life, this infrared reflector lamp is the right choice for a dependable replacement.
It is suitable for local warmth for muscles and joints, relaxation of tension, massage preparation and use after physical strain - always in accordance with the instructions for the appropriate infrared device.
Before ordering, compare the old lamp marking and your infrared device instructions - every specification must match.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | SAFETY INSTRUCTIONS – PHILIPS PAR38E INFRARED LAMPWARNING – INFRARED HEATUse the lamp only in a suitable infrared heat-lamp device designed for a 150 W E27 PAR38 infrared lamp.Follow the recommended exposure time and distance specified by the device in which the lamp is installed. Exposure that is too long or too close to the infrared lamp may cause skin burns or other undesirable skin reactions.Do not direct the infrared radiation toward the eyes. Always protect the eyes and follow the eye- and skin-protection instructions supplied with the infrared device.The lamp becomes very hot during operation. Allow it to cool completely before touching, removing or replacing it.If the lamp breaks, do not handle broken glass with bare hands. Use gloves or suitable protective tools to prevent cuts.Place broken lamp parts in a sealable plastic bag and dispose of them according to local waste and recycling regulations. Do not use a vacuum cleaner to collect broken lamp fragments.Use only with the correct rated mains voltage and a suitable E27 lamp holder.Disconnect the infrared device from the mains and allow the lamp to cool before replacing or handling the lamp.Keep the lamp and operating infrared device away from children and combustible materials.Do not use a damaged or cracked lamp.IMPORTANT: Always follow the operating instructions of the infrared device in which the lamp is installed, particularly regarding treatment distance and exposure time. Using the lamp at a shorter distance or for a longer period than recommended may cause burns or other adverse skin reactions. |
| EA_MANUFACTURER_MODEL | PAR38E 150W |
| EA_MANUFACTURER | Philips GmbH Market DACH Röntgenstr. 22 Hamburg, Germany, 22335 +49494028990 Unternehmenskommunikation@philips.com |
| EA_EU_OPERATOR | Philips GmbH Market DACH Röntgenstr. 22 Hamburg, Germany, 22335 +49494028990 Unternehmenskommunikation@philips.com |
