6 V / 12 V Solar Module with 3000 mAh Li-Ion Battery for Suntek and Bolyguard Trail Cameras
The solar power module with built-in 3000 mAh Li-Ion polymer battery is designed for compatible Suntek and Bolyguard trail cameras and helps extend their operating time in the field.
During daylight, the solar panel converts sunlight into electrical energy, which can be used to power the connected camera while also charging the built-in 3000 mAh battery.
Stored energy is also available at night or during periods with less sunlight, making the module particularly suitable for cameras installed for longer periods in remote locations.
Important: this product is a compatible accessory for selected Suntek and Bolyguard trail cameras. Always check the required voltage, connector size and polarity of your camera before connection.
Key Benefits
- Solar power helps reduce the need for frequent battery replacement in the trail camera.
- Built-in 3000 mAh Li-Ion battery stores energy for use at night and during periods with less sunlight.
- 6 V and 12 V output allows use with different compatible trail cameras.
- Maximum output current up to 2000 mA provides power for compatible cameras.
- Approx. 3 m cable allows the camera and solar panel to be positioned independently for optimal performance.
- IP54 protection makes the module suitable for outdoor use.
How Does the Solar Module Work?
The photovoltaic panel converts sunlight into electrical energy. During daylight, this energy can help power the trail camera while simultaneously charging the built-in 3000 mAh Li-Ion polymer battery.
When there is not enough sunlight, for example at night or during cloudy weather, stored energy from the battery can continue supplying power to the connected camera.
This system helps reduce the need for frequent visits to the camera for replacement of conventional batteries.
Compatible Trail Cameras
The solar module is suitable for selected Suntek and Bolyguard trail camera models, including:
- Suntek HC300M
- Suntek HC810M
- Suntek HC801+
- Suntek HC940Pro
- compatible Bolyguard trail cameras
Different versions of some camera models may use different power systems. Before ordering, check the voltage, connector and polarity of your camera.
Built-in 3000 mAh Li-Ion Battery
The solar module contains a built-in rechargeable 3000 mAh Li-Ion polymer battery that acts as an energy storage system.
Energy generated during the day can be stored and used when the solar panel cannot produce sufficient electrical power due to darkness, cloudy weather or temporary shading.
This helps provide a more consistent power supply to the trail camera throughout the day and night cycle.
6 V and 12 V Output
The solar module can provide compatible devices with 6 V or 12 V output voltage.
Always check the required voltage of your camera before connection. Using an incorrect output voltage may damage the trail camera.
Also verify connector polarity and connector size. A physically matching connector alone does not guarantee electrical compatibility.
5.0 × 2.0 mm DC Connector
The module uses an output power connector measuring approximately 5.0 × 2.0 mm.
Before ordering, we recommend comparing the connector with the external power input on your trail camera.
Correct Solar Panel Installation
Proper positioning of the panel is important for efficient solar charging.
- Install the solar panel in a location with as much sunlight as possible.
- Avoid permanent shade from trees and buildings.
- Orient the panel toward the area receiving the most daylight.
- Regularly remove leaves, dust and dirt from the panel surface.
- The approximately 3 m cable allows the panel to be positioned away from the camera.
- Route the cable so that it is not mechanically strained or damaged.
The amount of generated energy depends on weather conditions, season, panel orientation, shading and the amount of direct sunlight.
Suitable for Long-Term Field Use
- wildlife observation,
- hunting areas and feeding sites,
- forest trails,
- agricultural land,
- holiday homes and remote properties,
- construction sites,
- long-term trail camera installations.
Important Before Purchase
Before ordering, check:
- the exact trail camera model,
- whether the camera requires 6 V or 12 V external power,
- the 5.0 × 2.0 mm power connector size,
- connector polarity,
- camera compatibility with external power.
Suntek and Bolyguard are mentioned solely to describe product compatibility. The solar module is not presented as an original product manufactured by either brand.
Safe Use
- Use only with electrically compatible devices.
- Always check the correct output voltage before connection.
- Verify power connector polarity.
- Do not short-circuit the connectors.
- Do not open or modify the module or built-in battery.
- Do not expose the product to fire or extreme heat.
- Do not use a damaged cable or connector.
Solar Power for Suntek and Bolyguard Trail Cameras
The solar module with built-in 3000 mAh Li-Ion battery provides a practical way to extend the operating time of compatible trail cameras installed in remote locations.
The combination of a solar panel, built-in energy storage and an approximately 3 m connection cable provides flexible installation and helps reduce the need for frequent battery replacement.
Package contents: solar module with built-in 3000 mAh Li-Ion battery, connection cable and associated accessories shown with the product.
Trail camera not included.
