- Stock: In Stock
- Model: 45055
DC Power Cable 1.3/3.5 mm, 1.5 m for SUNTEK Trail Cameras
The DC power cable 1.3/3.5 mm is designed for connecting compatible SUNTEK trail cameras to an external power source.
The cable allows direct connection of lead-acid AGM batteries with the correct voltage, as well as other electrically compatible external DC power sources.
An external AGM battery with a higher capacity is particularly practical for long-term trail camera installations in the field, as it can significantly reduce the need for frequent replacement of batteries installed directly inside the camera.
Important: the 48 V specification represents the maximum rated voltage of the cable and does not mean that a SUNTEK trail camera should be powered with 48 V.
Key Benefits
- Allows external DC power supply for compatible SUNTEK trail cameras.
- Suitable for direct connection of lead-acid AGM batteries with the correct voltage.
- Also suitable for other compatible external DC power sources.
- An ideal solution for longer camera operation in the field.
- Reduces the need for frequent replacement of batteries inside the camera.
- 1.3/3.5 mm female DC socket.
- Cable length 1.5 m.
- Conductor cross-section 0.5 mm².
- Cable electrically rated up to 5 A.
Direct Connection of a Lead-Acid AGM Battery
One of the main advantages of the cable is the ability to directly connect a compatible SUNTEK trail camera to a lead-acid AGM battery.
A higher-capacity AGM battery can provide significantly greater available energy capacity than conventional batteries installed directly inside the camera.
This is particularly useful for cameras installed for several weeks or months in forests, hunting areas, feeding sites, agricultural land, construction sites or other remote locations.
Use only an AGM battery with a voltage that matches the power requirements of the specific trail camera model.
Connection to Other External Power Sources
In addition to AGM batteries, the cable can also be used with other electrically compatible external DC power sources.
Suitable power sources may include:
- external battery packs,
- suitable rechargeable batteries,
- regulated DC power supplies,
- solar systems with a suitable controller and battery,
- other compatible DC power sources.
The external source must provide the voltage, polarity and other electrical parameters required by the specific camera model.
Longer Trail Camera Operation in the Field
For cameras installed in the same location for extended periods, a higher-capacity external battery can significantly reduce the need to visit the camera for battery replacement.
Actual operating time depends on:
- trail camera model,
- external battery capacity,
- ambient temperature,
- number of triggers,
- number of photos and videos,
- use of IR illumination,
- mobile signal strength on cellular models.
Suitable Applications
The DC power cable is particularly useful for trail cameras installed at locations where longer operating time is required without frequent battery replacement.
- wildlife observation,
- hunting areas and feeding sites,
- forest trails,
- agricultural land,
- holiday homes and remote properties,
- construction sites,
- outdoor monitoring,
- difficult-to-access locations.
DC Connector 1.3/3.5 mm
The cable uses a 1.3/3.5 mm female DC socket.
Before purchase, check whether this connector size matches the power connection of your SUNTEK trail camera.
A visually similar DC connector does not automatically guarantee mechanical or electrical compatibility.
Cable Rating up to 5 A / 48 V
The cable is electrically rated for a maximum operating current of 5 A and a maximum rated voltage of 48 V.
These values represent the electrical capability of the cable and not the power requirements of the trail camera.
Warning: do not connect a SUNTEK trail camera to 48 V simply because the cable is rated for this voltage. Always use the supply voltage specified for the exact camera model.
Safe Use with an AGM Battery
- Use a battery with the correct voltage.
- Check polarity before connection.
- Prevent short circuits between the battery terminals.
- Install the battery securely and safely.
- Protect the battery from weather exposure.
- Do not use a damaged or deformed battery.
- Charge the AGM battery with a suitable charger.
Important Before Purchase
Before connecting or ordering the cable, check:
- the exact SUNTEK trail camera model,
- the required camera input voltage,
- the required polarity,
- the DC connector size,
- whether your camera model supports external power.
Incorrect supply voltage or incorrect polarity may damage the trail camera.
Package Contents
Trail camera and AGM battery are not included.
DC Power Cable for External Power Supply of SUNTEK Trail Cameras
The 1.3/3.5 mm DC cable provides a practical way to connect a compatible SUNTEK trail camera to an external battery or another suitable DC power source.
It is particularly suitable for direct connection of lead-acid AGM batteries and long-term field installations where you want to reduce the need for frequent replacement of batteries inside the camera.
Package contents: 1 × DC power cable 1.3/3.5 mm, length 1.5 m.
