- Stock: In Stock
- Model: TM2DRA8RT
Schneider Electric TM2DRA8RT is supplied as a new relay output expansion module for professional replacement in compatible Modicon M238 and Twido systems.
Schneider Electric TM2DRA8RT Relay Output Expansion Module – 8 Outputs for Modicon M238 and Twido
A brand-new eight-channel relay module for professional expansion, maintenance or restoration of installed Modicon M238 and Twido systems – the right choice when the exact TM2DRA8RT reference is required.
The module provides 8 relay outputs with normally open contacts. It is suitable for adding relay-based control to compatible automation cabinets where the established I/O architecture must remain intact.
With a rating of up to 2A per channel, a 7A maximum output common, removable screw terminal block and DIN-rail mounting, it supports organised professional system expansion.
Before ordering: verify the TM2DRA8RT reference, PLC platform, relay output count and type, common points, loads and wiring diagram.
Add eight relay outputs to an installed automation system
The TM2DRA8RT is a practical way to expand a compatible controller with relay outputs when the system needs additional control functions.
- Eight NO relay outputs allow connection to multiple compatible output functions in an automation application.
- Up to 2A per channel provides a clearly defined electrical capacity for suitably selected loads.
- Two output common points support organised distribution of relay channels in the control cabinet.
- Removable screw terminal block simplifies wiring preparation, connection and later servicing.
- Compact DIN-rail construction saves valuable space and supports organised expansion of a Modicon M238 or Twido system.
For applications where the PLC needs additional relay-based control
The relay output module adds normally open switching contacts to a controller. The PLC can use them to control compatible output functions within the electrical requirements of the individual application.
It is a sensible option for professional maintenance, servicing or restoration of installed systems where the exact output module must be replaced without a major change to the established I/O design.
- For expanded relay functions: when an installed PLC system requires eight additional output channels.
- For system servicing: where a TM2DRA8RT reference is already installed in the cabinet.
- For professional restoration: as an exact replacement in a compatible M238 or Twido project.
Important: before connection, verify the rated voltage and current of loads as well as the total current load of each relay group.
Compatibility where the exact module reference matters
The TM2DRA8RT is a dedicated relay output module for compatible Schneider Electric Modicon M238 and Twido controllers. For industrial expansions, the PLC platform, output arrangement, terminals and electrical requirements must match.
- Primary use: relay I/O expansion in Modicon M238 and Twido systems.
- Output configuration: eight normally open relay outputs.
- Electrical capacity: up to 2A per channel and 7A maximum per output common.
- Connection: one removable screw terminal block.
Essential check: this is not a universal relay card for every PLC – confirm TM2 support, system configuration and installed wiring before ordering.
Reliable relay contacts for clearly defined loads
Every output uses a normally open relay contact. When planning connections, observe the 2A per-channel rating and the 7A limit for an output common point.
For professional installation, choose relay loads according to load type, voltage and the official wiring diagram. The module includes local status indication for practical visibility of output signals.
Compact DIN-rail installation and organised wiring
The module measures 27.3 × 90 × 84.6 mm, weighs approximately 0.11kg and is designed for 35mm symmetrical DIN-rail mounting. Its removable screw terminal block simplifies conductor preparation and service work.
- Check relay loads: do not exceed 2A per channel or 7A per output common.
- Consider the load type: verify requirements for resistive, inductive or other connected devices.
- Use the official wiring diagram: install conductors and load protection according to the documentation for the individual application.
Before commissioning, check connections, common terminals, load protection and PLC program configuration.
For professional and safe operation
- Disconnect power before connection and protect the control cabinet from unintended re-energisation.
- Observe relay limitations and use suitable protection for connected electrical loads.
- Verify the system before start-up, including wiring, loads and the operation of every relay channel.
Incorrect connection or relay overload can cause incorrect system operation. Verify wiring, common terminals and every connected device before commissioning.
Package Contents
1 × Schneider Electric TM2DRA8RT relay output expansion module
Supplied brand new in box for professional use in compatible industrial automation systems.
Choose the exact TM2DRA8RT for relay I/O expansion
If your Modicon M238 or Twido system uses the TM2DRA8RT reference, this brand-new-in-box module is a practical solution for professional maintenance, servicing or restoration of relay output channels.
The combination of eight NO relay outputs, 2A per channel, a 7A output-common limit, removable terminal block and DIN-rail mounting provides the important characteristics for compatible industrial applications.
Before ordering, compare the TM2DRA8RT reference, PLC platform, output arrangement, relay loads, wiring diagram and existing wiring.
