.png_compress-550x550.png "14.8V 2600mAh Li-Ion Robot Vacuum Battery")
.jpg_compress-550x550.jpg "14.8V 2600mAh Li-Ion Robot Vacuum Battery")
.png_compress-80x80.png "14.8V 2600mAh Li-Ion Robot Vacuum Battery")
.jpg_compress-80x80.jpg "14.8V 2600mAh Li-Ion Robot Vacuum Battery")
- Stock: In Stock
- Model: 83349
- Weight: 0.14kg
14.8V 2600mAh Li-Ion Battery Pack for Ecovacs, iLife, Dibea, Zaco and Silvercrest Robot Vacuums
A rechargeable 4-cell Li-Ion battery pack that provides a practical way to restore autonomous cleaning performance when the existing battery in a compatible robot vacuum has lost usable capacity.
The battery pack provides a nominal voltage of 14.8V, a capacity of 2600mAh and nominal energy of 38.48Wh. Its compact 70 × 37 × 37mm dimensions support installation in devices designed for this battery-pack format.
It is designed as a compatible replacement for selected Ecovacs, iLife, Dibea, Zaco and Silvercrest robot vacuums using the relevant battery references. Matching voltage alone is not sufficient – always verify the reference, dimensions and connector arrangement before ordering.
Before ordering: compare the old battery reference, dimensions, contact layout and connector. This battery pack is suitable only for genuinely compatible models.
Restore the running time of a compatible robot vacuum
Replacing a worn battery is a practical choice when a robot vacuum is otherwise fully functional but its cleaning time has become noticeably shorter.
- 2600mAh capacity and 38.48Wh energy provide an energy reserve for compatible robot vacuums.
- 14.8V four-cell construction suits devices designed for a comparable Li-Ion battery pack.
- Compact 70 × 37 × 37mm dimensions are important for correct placement in the battery compartment.
- Rechargeable Li-Ion technology enables repeated use with the device’s suitable charging system.
- Battery-pack replacement can extend the useful life of a robot vacuum without replacing the entire appliance.
A practical solution when a robot vacuum loses power too quickly
Shorter cleaning cycles, more frequent returns to the charging dock or interrupted operation can indicate a worn battery pack. When the device uses the correct reference and dimensions, replacing the battery can be an effective step toward restoring its use.
Before replacement, check the condition of the old battery and consult the robot vacuum manufacturer’s battery-replacement instructions. Fully charge the new battery pack with a compatible charging system before first use.
- Compare the markings and references on the old battery with the listed compatible references.
- Check the battery-compartment dimensions and connector arrangement.
- Install the battery only when it precisely matches the existing pack.
An unsuitable battery pack may not fit correctly or operate with the robot vacuum.
Compatibility with selected robot-vacuum ranges
This battery pack is listed as compatible with selected models from the brands below. The list is useful for selection, but matching the reference and physical design of the existing pack must always determine final suitability.
- Ecovacs: CEN 540, Deebot 500, 501, CEN540, CEN546, CEN550, CEN640, CEN646, CEN660, CR120, CR130, DG800, DL33, DL35, KK8, M82, N79, N79S, N79SE, N79W, V7, V7S, V780, X500 and X580.
- iLife: A4, A4s, A4s Pro, A6, A7, A9, CW-310, CW-320, Eco R3N5, V3, V5, V5 Pro, V5s, V7, V7s Plus, V7s Pro, X3, X620 and Y8H4.
- Dibea: D960, GT9, GT200, V750, V780, V780s and V870.
- Zaco: A4, A6, A8, A8s, A9 and A9s.
- Silvercrest: SSRA1.
Important: belonging to a listed brand or series does not alone confirm compatibility. Always compare the battery reference, dimensions and connector.
Replacement for selected original battery references
The battery pack is listed as a compatible replacement for the following references:
- Ecovacs 4ICR19/65
- Ecovacs BL7402A
- Ecovacs INR18650-M26-4S1P
- iLife PX-B020
- Silvercrest 305857
- Silvercrest UR18650ZT-4S1P-AAF
- Zaco 501929
The original reference is one of the most reliable ordering checks because it helps confirm both the electrical characteristics and the physical construction of the battery pack.
Li-Ion technology for a compact energy reserve
The pack contains 4 Li-Ion cells that together provide a nominal 14.8V output and 38.48Wh of energy. This combination is intended for robot vacuums that require a compact rechargeable energy source with the appropriate electrical characteristics.
The 2600mAh capacity describes the battery pack’s energy reserve. Actual robot-vacuum running time depends on device compatibility, the condition of drive components and the way the appliance is used.
Check electrical and mechanical fit before installation
For correct replacement, follow the battery-service or replacement instructions specified by the robot vacuum manufacturer.
- Switch off the robot vacuum before opening its battery compartment.
- Compare the 70 × 37 × 37mm dimensions with the old battery pack.
- Check the contact layout and connector before connecting the new battery.
Do not force the battery or connector into place. If the pack does not match exactly, do not use it.
Safe charging, use and storage
- Fully charge the battery before first use with a suitable charging system.
- Charge indoors only at ambient temperatures between 0°C and +40°C.
- Operate and store between -10°C and +45°C and protect the battery from heat, fire, water and moisture.
- Stop using a damaged battery, especially if it overheats, becomes deformed, changes colour or leaks.
Do not open or short-circuit the Li-Ion battery pack. Protect the contacts from metal objects and the battery from impacts and sharp objects.
Package contents
1 × 14.8V / 2600mAh / 38.48Wh Li-Ion battery pack
The listed delivery contains the battery pack only.
Extend the useful life of a compatible robot vacuum
If your robot vacuum uses the correct battery reference and its existing battery has lost capacity, this 14.8V 2600mAh Li-Ion battery pack is a practical replacement solution.
The combination of 38.48Wh, 4 cells and compact 70 × 37 × 37mm dimensions is intended for selected compatible Ecovacs, iLife, Dibea, Zaco and Silvercrest models.
Before ordering, compare the reference, voltage, dimensions, contacts and connector with the battery pack in your device.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | SAFETY INSTRUCTIONS Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Read all safety warnings and instructions and keep them for future reference. 1. The battery is supplied partially charged. Fully charge it with a suitable charger before first use. 2. Charge the battery only with chargers suitable for this battery type. Using an unsuitable charger may create a fire hazard. 3. Keep the battery out of reach of children. 4. Do not open the battery. Risk of short circuit. 5. If the battery is damaged or used improperly, vapours may be released. The battery may catch fire or explode. Move to fresh air and seek medical attention if symptoms occur. 6. If used incorrectly or damaged, flammable liquid may leak from the battery. Avoid contact. Rinse skin with water. If liquid enters the eyes, rinse thoroughly and seek medical attention. 7. A damaged battery may leak and affect nearby objects. Clean or replace affected parts if necessary. 8. Do not short-circuit the battery. Keep it away from paper clips, coins, keys, screws and other metal objects that could bridge the terminals. A short circuit may cause burns or fire. 9. Do not puncture the battery or expose it to strong impacts or mechanical stress. This may cause overheating, fire or explosion. 10. Do not repair damaged batteries yourself. Servicing should only be carried out by the manufacturer or an authorised service centre. 11. Protect the battery from heat, direct sunlight, fire, dirt, water and moisture. 12. Use the battery only for its intended purpose. If it becomes unusually hot, discoloured, deformed or starts leaking, stop using it immediately. 13. Operate and store the battery at temperatures between -10 °C and +45 °C. 14. Charge the battery only at temperatures between 0 °C and +40 °C. 15. Do not charge the battery continuously for more than 12 hours. Charge indoors only. 16. For long-term storage, store the battery at approximately 60% charge and recharge it every 90 days. 17. In case of fire, do not use water. Use sand or a dry powder fire extinguisher and only if you can do so without putting yourself at risk. |
| EA_MANUFACTURER_MODEL | 800108510 |
| EA_MANUFACTURER | B&W Handelsgesellschaft mbH Thormeyerstr. 1 01877 Bischofswerda Germany Email: product-compliance@b-und-w.com |
| EA_EU_OPERATOR | B&W Handelsgesellschaft mbH Thormeyerstr. 1 01877 Bischofswerda Germany Email: product-compliance@b-und-w.com |
.png_compress-500x500.png "Universal 4.8V 700mAh NiMH Battery Pack – 4× AAA / Micro")