- Stock: In Stock
- Model: WAT419
ORNO OR-WAT-419(GS) Plug-in Power Meter with LCD Display
A practical Schuko plug-in meter for quickly checking the consumption of a connected appliance, monitoring used kWh and estimating electricity cost at home, in the office or in the workshop.
Insert the ORNO OR-WAT-419(GS) between a wall socket and the appliance. Its large LCD display lets you monitor current power, voltage, total energy consumption and cost, so you can quickly see how much electricity a specific device actually uses.
The meter is designed for a standard grounded Type F Schuko 230V AC socket. It handles loads up to 16A or 3680W, making it suitable for many regular household and office appliances.
Before connection: check that the appliance does not exceed 16A or 3680W. The OR-WAT-419(GS) version has no display backlight and is intended for dry indoor rooms only.
Find out which appliances actually affect your electricity bill
The meter is useful when you want electricity-use decisions to be based on real measurements instead of an estimate from the device label.
- Current power in watts shows how much electricity an appliance uses at a specific moment.
- Total energy consumption in kWh lets you monitor use over a longer operating period.
- Adjustable electricity price provides an estimated cost reading for the connected appliance.
- Large LCD display makes selected data easy to read without an app or WiFi connection.
- Plug-in design enables use without installation work, electrical modifications or special tools.
Simple measurement without electrical installation work
Plug the meter into a grounded 230V wall socket, then connect the appliance you want to monitor to its Schuko outlet. Data refreshes every second during operation.
Use the MODE button to select five readings: power, voltage, accumulated energy in kWh, accumulated cost and the configured electricity price in €/kWh. To set the cost, hold MODE for around three seconds and enter your electricity price.
- Connect the meter directly to a grounded 230V wall socket.
- Plug the switched-off appliance into the meter, then switch it on.
- Use MODE to select readings and set the €/kWh price when needed.
The cost result is for information only. The meter is not calibrated for billing or official energy measurement.
Useful for household and office appliances with a Schuko plug
The OR-WAT-419(GS) helps monitor appliances normally connected directly to a standard Type F Schuko socket.
- Computers, monitors and network equipment
- TVs, audio equipment and game consoles
- Refrigerators, freezers and smaller household appliances
- Chargers, power adapters, lighting and other plug-in loads
Check the appliance's rated power. The meter is not designed for loads above 3680W or for connection to other electrical socket types.
Five readings for a clearer view of energy and cost
By changing the display mode, you can quickly check current power in W, mains voltage, accumulated energy in kWh and calculated cost. This makes the meter useful for a quick check as well as monitoring an appliance over several hours or days.
The electricity price can be set from 0.00 to 99.99 €/kWh, while cumulative cost can be displayed up to 9999 €. Use the RESET button to clear readings and restore factory settings.
Compact meter that needs no batteries or app
Its 63 × 107 × 75mm housing plugs directly into the mains socket. The meter has no built-in battery, so no additional batteries or charging are needed for operation.
- Use it only in dry indoor rooms.
- Do not cover the meter and keep the plug accessible.
- Always disconnect it from mains power before cleaning or any other handling.
The (GS) version has no backlit display. Adequate external light is required for reading the screen.
Safe use within the permitted electrical limits
- Indoor use only: IP20 protection is not suitable for damp rooms, outdoor conditions or contact with water.
- Do not use a damaged housing: do not open, modify or repair the meter yourself.
- Observe the maximum load: total connected power must not exceed 3680W or 16A.
This meter is not a substitute for an official electricity meter. It is designed for personal consumption monitoring, not cost settlement or measurements that require calibration.
Package Contents
1 × ORNO OR-WAT-419(GS) plug-in power meter with LCD display
No batteries are needed for operation. Appliance and extension lead are not included.
Monitor electricity use and identify unnecessary costs more easily
The ORNO OR-WAT-419(GS) is a sensible choice when you want to measure the use of an individual plug-in appliance easily and check how much energy and estimated cost it creates while operating.
The combination of power, voltage, kWh and configurable electricity-price displays helps you compare appliances, check standby consumption and make a more informed decision about appliance use or replacement.
Before use, check the Type F Schuko connection, dry indoor environment and maximum load of 3680W / 16A.
| Safety & Compliance | |
| EA_SAFETY_WARNINGS | IMPORTANT!Read these instructions before using the device and keep them for future reference.Repairs or modifications carried out by the user will void the warranty. The manufacturer is not responsible for any damage resulting from incorrect installation or improper use of the device.Technical specifications may be changed without prior notice. The manufacturer reserves the right to modify product features or introduce design changes that do not reduce the product's performance or functionality.Orno-Logistic Sp. z o.o. is not responsible for consequences resulting from failure to follow these instructions. The current version of the instructions is available at www.orno.pl. All translation, interpretation and copyright rights are reserved.1. Use the device only for its intended purpose. 2. Always disconnect the power supply before carrying out any work on the device. 3. Do not immerse the device in water or other liquids. 4. Do not use the device if the housing is damaged. 5. Do not open or repair the device yourself. 6. The device is intended for indoor use only. 7. Use the device only in dry environments. 8. Do not exceed the specified maximum load values. |
| EA_MANUFACTURER_MODEL | OR-WAT-419(GS) |
| EA_MANUFACTURER | ORNO-LOGISTIC Sp. z o.o. PL. 44-141 Gliwice ul. Rolników 437 Poland e-mail: techniczny@orno.pl |
| EA_EU_OPERATOR | ORNO-LOGISTIC Sp. z o.o. PL. 44-141 Gliwice ul. Rolników 437 Poland e-mail: techniczny@orno.pl |
-250x250.jpg "1700W IR Fireplace-Style Heater with WiFi Control – Heats Rooms up to 25 m²")
-250x250w.png "1700W IR Fireplace-Style Heater with WiFi Control – Heats Rooms up to 25 m²")
