This offer ends in:
- Stock: In Stock
- Model: 39047
Aquaionic Deionized Water for Colloid Production - 10 × 1 L / Total 10 L
A practical set of 10 individual 1-litre bottles of Aquaionic deionized water for regular technical colloid production - always keep a clean, freshly sealed bottle at hand without opening a large container.
The water has a conductivity of approximately 2 µS/cm when the bottle is filled and is especially suitable for use with Ionic Pulser Pro and Colloidmaster CM2000 generators. Low conductivity is important for a controlled technical production process.
With a total volume of 10 litres, this set is a sensible choice for regular generator users who want a convenient supply of water in practical one-litre bottles. Separate bottles provide clearer storage and easier dosing for each preparation.
Important: this water is non-sterile and is not suitable for injections, infusions or eye drops. The product is offered exclusively for technical use.
A larger supply, conveniently packed in ten one-litre bottles
- A total of 10 litres of deionized water provides a practical supply for regular use of a colloid generator.
- 10 separate 1-litre bottles enable easier handling, clearer storage and use only when needed.
- Approximately 2 µS/cm conductivity provides technically suitable conditions for use with compatible generators.
- Suitable for Ionic Pulser Pro and Colloidmaster CM2000 allows use with popular generators from EA Elektronika.
- At least two years unopened shelf life allows you to keep the set as a reliable supply.
For a controlled technical colloid-production process
When producing colloids, it is important to use water with suitably low conductivity and without an unknown mineral composition. Aquaionic deionized water is prepared for technical use with a compatible generator and suitable electrodes.
The 10 × 1L format is particularly practical when you use your generator regularly. Open only the bottle you currently need, while the rest of the set remains sealed and ready for later use.
- Use a clean container, clean electrodes and a suitable generator.
- Use the required amount from one bottle for each preparation.
- Close the bottle securely after use and follow the generator instructions.
Do not use tap water, mineral water or water from reverse-osmosis devices: for colloidal silver production, these are not a suitable replacement for purpose-made Aquaionic deionized water.
Compatible with Ionic Pulser Pro and Colloidmaster CM2000 generators
Aquaionic water is especially suitable for technical use with Ionic Pulser Pro and Colloidmaster CM2000 generators. For predictable use, always follow the instructions for your generator, electrodes and accessories.
- Ionic Pulser Pro - use in accordance with the generator instructions.
- Colloidmaster CM2000 - use in accordance with the generator instructions.
- Other compatible generators - where the manufacturer requires deionized water with comparable conductivity.
Check the generator requirements before use: suitable water is only one important condition; correct electrodes, clean equipment and the correct procedure also matter.
Low conductivity for a technically cleaner starting point
Conductivity of approximately 2 µS/cm when the bottle is filled means a very low amount of dissolved ions in the water. This is important when you want to use water with controlled properties in a technical production process.
Ordinary drinking water and mineral water may contain minerals and other dissolved substances, so they are not a suitable choice for this purpose. Aquaionic is designed specifically for situations where you need deionized water in convenient one-litre packaging.
Correct storage and use of the 10-litre set
Keep the set in its original, unopened bottles and observe the expiry date stated on the packaging. Individual one-litre bottles allow most of your supply to remain unopened until needed.
- Open only the bottle currently required.
- Prevent contaminants from entering the bottle, container or generator.
- Do not mix with tap water, mineral water or any other water.
- Before use, check that the bottle is undamaged and properly sealed.
Shelf life: at least 2 years when unopened. After opening, keep handling clean and store the bottle securely closed.
Important use limitations
- The product is not sterile. It is not suitable for injections, infusions or eye drops.
- For technical use only. Do not use it for medical, pharmaceutical or other purposes not expressly stated.
- This is not drinking water. The product is not intended for consumption.
- Always follow the instructions for your equipment. EA Elektronika makes no health claims regarding colloidal solutions.
Warning: do not use the product in any way other than for technical use. EA Elektronika accepts no liability for any other use of the product.
Package Contents
10 × 1L Aquaionic deionized water for technical colloid production
Total package volume: 10 litres. Generator, electrodes, containers and other equipment are not included.
Keep enough deionized water on hand for regular technical generator use
The Aquaionic 10 × 1L pack is a practical choice for anyone who uses a colloid generator regularly and wants a water supply in separate, easy-to-use bottles.
With low conductivity, a total volume of 10 litres and suitability for Ionic Pulser Pro and Colloidmaster CM2000, this set provides a solid basis for technical preparation with compatible equipment.
For predictable use, always choose purpose-made deionized water, clean accessories and follow the instructions for your generator.
